Material Safety Data Sheet
EMERGENCY RESPONSE NUMBER: 514-613-0811
INFORMATION CALL: 514-613-0811
EMAIL: [email protected]
01
Substance Identification
NAME: Catalog Peptide
Catalog ID.: XXXX-XXX
02
Hazards Identification
GHS Classification: Not a hazardous substance by GHS.
Caution: The chemical, physical and toxicological properties of this product have not been thoroughly investigated. Handle with care.
NFPA RATING
HEALTH: 0
FLAMMABILITY: 0
REACTIVITY: 0
For additional information on toxicity, please refer to Section 11.
03
Composition
Molecular Formula: Sequence Specific
CAS Registry #: Sequence Specific or N/A
Synonyms: Sequence Specific
Molecular Weight: Sequence Specific
EC#: Sequence Dependent or N/A
04
First Aid Measures
General Advice: If medical attention is required, show this safety data sheet to the doctor.
If Inhaled: If inhaled, move person to fresh air. If not breathing, give artificial respiration and consult a physician.
In Case of Skin Contact: Wash affected area with soap and water. Consult a physician if any exposure symptoms are observed.
In Case of Eye Contact: Immediately rinse eyes with fresh running water for at least 15 minutes. Consult a physician.
If Swallowed: If swallowed do NOT induce vomiting, unless directed to do so by a physician. Rinse mouth with water. Never give anything by mouth to an unconscious person. Seek medical advice.
05
Firefighting Measures
Extinguishing Media: Use water spray or fog, alcohol-resistant foam, dry chemical powder or carbon dioxide.
Special Hazards Arising from the Substance or Mixture: Carbon oxides, Nitrogen oxides
Advice for Firefighters: Wear self contained breathing apparatus and protective gloves for firefighting if necessary.
Specific Fire Hazard: May emit toxic fumes under fire conditions.
06
Accidental Release Measures
Personal precautions: Wear respiratory protection and other applicable PPE. Avoid all personal contact, including inhalation. Wear protective clothing when risk of exposure occurs. Use in a well ventilated area. Avoid dust formation. Avoid breathing vapors, mist or gas. Evacuate personnel to safe areas. Avoid breathing dust.
Environmental precautions: Prevent further leakage or spillage if safe to do so. Do not let product enter drains or water mains.
Method and materials for containment and cleaning up: Pick up and arrange disposal without creating dust. Sweep up and shovel. Keep in suitable, closed containers for disposal.
07
Handling And Storage
Precautions for safe handling: Avoid contact with skin and eyes. Avoid formation of dust and aerosols. Provide appropriate exhaust ventilation at places where dust is formed.
Conditions for safe storage: Keep container tightly closed in a dry and well-ventilated place. Keep in a dry place. Storage conditions: Store at -20°C refrigerated.
Specific End Uses: For scientific research and development only. Not for use in humans or animals.
08
Exposure Controls, Personal Protection
Control Parameters: Contains no components with established occupational exposure limits.
Appropriate Engineering Controls: A laboratory fumehood or other appropriate form of local exhaust ventilation should be used to avoid exposure.
Personal Protective Equipment: All recommendations below are advisory in nature and a risk assessment should be performed by the employer/end user prior
to use of this product. The type of protective equipment must be selected based on the amount and concentration of the dangerous material being used in the workplace.
Eye & Face Protection: Safety goggles or face shield. All equipment should have been tested and approved under appropriate standards, such as NIOSH (US), CSA (Canada), or EN 166 (EU).
Skin Protection: Gloves should be used when handling this material. Gloves are to be inspected prior to use. Contaminated gloves are to be removed using proper glove removal technique so that the outer surface of the glove does not contact bare skin. Dispose of contaminated gloves after use in compliance with good laboratory practices and local requirements.
Gloves used for incidental exposures (splash protection) should be designated as “chemical resistant” by EU standard EN 374 with the resistance codes corresponding to the anticipated use of the material. Unrated gloves are not recommended.
Suggested gloves: AnsellPro Sol-Vex nitrile gloves style 37-175, 15 mil thickness.
*Penetration time has not been determined.
Gloves used for prolonged direct exposure (immersion) should be designated “chemical resistant” as per EN 734 with the resistance codes corresponding to the anticipated use of the material.Suggested gloves: AnsellPro Viton/Butyl gloves style 38-612, 4/8 mil thickness.
**Penetration time has not been determined.
These recommendations may not apply if the material is mixed with any other chemical, or dissolved into a solution. A risk assessment must be performed to ensure the gloves will still offer acceptable protection.
Body Protection: Fire resistant (Nomex) lab coat or coveralls.
Respiratory Protection: Recommended respirators are NIOSH-approved N100 or CEN-approved FFP3 particulate respirators. These are to be only used as a backup to local exhaust ventilation or other engineering controls. If the respirator is the only means of protection, a full-face supplied air respirator must be used.
09
Physical And Chemical Properties
Appearance: Solid or Powder
**Physical properties such as boiling, melting and odour are sequence dependant
10
Stability & Reactivity
Reactivity: No data available.
Chemical Stability: Stable under recommended storage conditions
Incompatible Materials: Strong oxidizing agents, heat, strong acids and bases.
11
Toxicological Information Potential Health Effects and Routes of Exposure
Inhalation: May be harmful if inhaled. May cause respiratory tract irritation.
Ingestion: May be harmful if swallowed.
Skin: May be harmful if absorbed through skin. May cause skin irritation.
Eyes: May cause eye irritation.
12
Ecological Information
No Data Available.
13
Disposal Consideration
Product may be burned in an incinerator equipped with afterburner and scrubber. Excess and expired materials are to be offered to a licensed
hazardous material disposal company. Ensure that all Federal and Local regulations regarding the disposal and destruction of this material are followed.
Product is not to be disposed of in sanitary sewers, storm sewers, or landfills.
14
Transportation Information
D.O.T. / IATA
PROPER SHIPPING NAME: N/A
NON-HAZARDOUS FOR TRANSPORTATION: This substance is considered to be non-hazardous for transport.
IMDG/ARD/RID
NON-HAZARDOUS FOR TRANSPORT: This substance is considered to be non-hazardous for transport.
15
Regulatory Information
A) Canada: DSL NDSL Status: This product is not listed on the Canadian DSL/NDSL.
B) United States: TSCA Status: This product is not listed on the US EPA TSCA. C) European Union
ECHA Status: This product is not registered with the EU ECHA.
OSHA STATUS: Not Listed
SARA TITLE III INFORMATION:
Section 302 Extremely Hazardous Substance: Unlisted
Section 313 Toxic Chemicals: Unlisted
16
Other Information
List of Abbreviations
LD50: Median lethal dose of a substance required to kill 50% of a test population.
LC50: Medial lethal concentration of a substance required to kill 50% of a test population. LDLo Lowest known lethal dose
TDLo: Lowest known toxic dose
IARC: International Agency for Research on Cancer
NTP: National Toxicology Program
RTECS: Registry of Toxic Effects of Chemical Substances
